BMW ALPINA B4 S BITURBO EDITION 99

Technical Data

BMW ALPINA B4 S BITURBO EDITION 99 Coupé

Engine

Cylinders 6 in line
Capacity (cc) 2979
Bore (mm) 84,0
Stroke (mm) 89,6
Compression ratio (:1) 10,2
Max output (kW (hp) / rpm) 332 (452) / 5500-6250
Max torque (Nm / 1/min) 680 / 3000-4500
Engine management BOSCH MEVD 17.2.G
Fuel type 98-octane
Emissions classification Euro 6d-TEMP

Performance

Acceleration 0-100 km/h (s) 4,2
Top speed (km/h) 306

Fuel consumption *

Urban (l/100km) 12,1
Extra-urban (l/100km) 7,3
Combined (l/100km) 9,1
CO2 emissions combined (g/km) 207
CO2 efficiency F

Transmission

Type 8-Speed Sport-Automatic ZF 8HP70 SWITCH-TRONIC
1st 4,71
2nd 3,14
3rd 2,11
4th 1,67
5th 1,29
6th 1,00
7th 0,84
8th 0,67
Final drive ratio 2,81

Wheels and tyres

Standard wheels and tyres ALPINA CLASSIC 20"
Front 8 x 20 245/30 ZR20
Rear 9 x 20 265/30 ZR20

Dimensions

Length (mm) 4640
Width (mm) 1825
Height, unladen (mm) 1373
Wheelbase (mm) 2810
Track, front (mm) 1552
Track, rear (mm) 1576
Luggage capacity (l) 445
Fuel tank capacity (l) ca. 60

Weight

Unladen (EU) (kg) 1690
Max permissible (kg) 2135
Permitted load (kg) 520
Max axle load, front (kg) 1030
Max axle load, rear (kg) 1150
Max trailer load, braked (kg) 1700
Max trailer load, unbraked (kg) 750

Efficiency-Class

Determined on the basis of the measured CO2 emissions taking into account the mass of the vehicle.

New test procedure WLTP

Stated fuel consumption and CO2 emissions are measured pursuant to EU Regulation 715/2007 in its applicable version. From 1st of September 2018 the Worldwide Harmonized Light Vehicles Test Procedure (WLTP) has replaced the New European Driving Cycle (NEDC). Regardless of the applied test procedure, it is currently still mandatory to state fuel consumption and CO2 emissions according to NEDC, hence stated values are determined based on the WLTP test procedure and are converted to NEDC for comparison purposes. Depending on your country, vehicle related taxes or other duties may be based on fuel consumption and CO2 emissions data which differs from that stated here. The provision of additional fuel consumption and CO2 emissions as determined according to WLTP is currently voluntary until their provision becomes mandatory by law.

Further information on specific fuel consumption and CO2 emissions of new passenger cars is provided by the ‚Leitfaden über den Kraftstoffverbrauch, die CO2-Emissionen und den Stromverbrauch neuer Personenkraftwagen‘ which can be obtained free of charge at all points of sale and from the Deutsche Automobil Treuhand GmbH (DAT) or online https://www.dat.de/co2/.