Technical Data



Cylinders 6 in line
Capacity (cc) 2993
Bore (mm) 84.0
Stroke (mm) 90.0
Compression ratio (:1) 16.5
Max output (kW (hp) / rpm) 261 (355) / 4000 - 4200
Max torque (Nm / 1/min) 730 / 1750 - 2750
Engine management BOSCH DDE 8.53
Fuel type Diesel
Emissions classification Euro 6d-ISC-FCM


Acceleration 0-100 km/h (s) 4.6
Top speed (km/h) 273 **

Fuel consumption *

Urban (l/100km) 9.4
Extra-urban (l/100km) 5.2
Combined (l/100km) 6.7
CO2 emissions combined (g/km) 176
CO2 efficiency C


Type 8-Speed Sport-Automatic ZF 8HP76 SWITCH-TRONIC
1st 5.50
2nd 3.52
3rd 2.20
4th 1.72
5th 1.32
6th 1.00
7th 0.82
8th 0.64
Final drive ratio 2.47

Wheels and tyres

Standard wheels and tyres ALPINA DYNAMIC 19"
Front 8.5 x 19" 255/35 ZR19
Rear 9.5 x 19" 265/35 ZR19


Length (mm) 4719
Width (mm) 1827 (2068)
Height, unladen (mm) 1440
Wheelbase (mm) 2851
Track, front (mm) 1577
Track, rear (mm) 1572
Luggage capacity (l) 480
Fuel tank capacity (l) ca. 59


Unladen (EU) (kg) 1950
Max permissible (kg) 2325
Permitted load (kg) 450
Max axle load, front (kg) 1155
Max axle load, rear (kg) 1255
Max trailer load, braked (kg) 1800
Max trailer load, unbraked (kg) 750

* Preliminary data.
** In combination with ALPINA CLASSIC 20" wheel / tyre combination reduced top speed by approximately 3 km/h.

BMW ALPINA D3 S:                                                  Saloon                            Touring
Fuel consumption, combined (WLTP):                     7.6 l/100km                      7.6 l/100km
CO2 emissions combined (WLTP):                          198 g/km                          198 g/km

EU tyre Label

EU tyre label = fuel efficiency class / wet grip class / external rolling noise class, external rolling noise value

For more detailed information, please click here:
EU tyre labels - information according to Regulation (EU) 2020/740

New test procedure WLTP

Stated fuel consumption and CO2 emissions are measured pursuant to EU Regulation 715/2007 in its applicable version. From 1st of September 2018 the Worldwide Harmonized Light Vehicles Test Procedure (WLTP) has replaced the New European Driving Cycle (NEDC). Regardless of the applied test procedure, it is currently still mandatory to state fuel consumption and CO2 emissions according to NEDC, hence stated values are determined based on the WLTP test procedure and are converted to NEDC for comparison purposes. Depending on your country, vehicle related taxes or other duties may be based on fuel consumption and CO2 emissions data which differs from that stated here. The provision of additional fuel consumption and CO2 emissions as determined according to WLTP is currently voluntary until their provision becomes mandatory by law.

Further information on specific fuel consumption and CO2 emissions of new passenger cars is provided by the ‚Leitfaden über den Kraftstoffverbrauch, die CO2-Emissionen und den Stromverbrauch neuer Personenkraftwagen‘ which can be obtained free of charge at all points of sale and from the Deutsche Automobil Treuhand GmbH (DAT) or online